This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The web map service portrays detailed graphic representation of features that appear on the Earth's surface. These features include the administration boundaries from the Geoscience Australia 250K Topographic Data, including state forest and reserves.

This web service (WFS/WMS) contains sediment and geochemistry data for the Oceanic Shoals Commonwealth Marine Reserve (CMR) in the Timor Sea collected by Geoscience Australia during September and October 2012 on RV Solander (survey GA0339/SOL5650). The detailed metadata for the individual sediment and geochemistry layers are in the following GeoCAT records: 78786, 78788, 78789, 78790, 78791, 78793, 78794, 78795, 78796, 78798 and 79005. Further information on the survey is available in the post-survey report published as Geoscience Australia Record 2013/38: Nichol, S.L., Howard, F.J.F., Kool, J., Stowar, M., Bouchet, P., Radke, L., Siwabessy, J., Przeslawski, R., Picard, K., Alvarez de Glasby, B., Colquhoun, J., Letessier, T. & Heyward, A. 2013. Oceanic Shoals Commonwealth Marine Reserve (Timor Sea) Biodiversity Survey: GA0339/SOL5650 Post Survey Report. Record 2013/38. Geoscience Australia: Canberra. (GEOCAT #76658).

This service is produced for the National Map project. It provides seamless topographic greyscale mapping for the whole of Australia, including the external territories of Cocos (Keeling) Islands, Christmas Island, Norfolk Island and Lord Howe Island. The service consists of Geoscience Australia data at smaller scales and OpenStreetMap data is used at larger scales. The service contains layer scale dependencies.

The DMCii Mosaic presents a sample of imagery acquired by Geoscience Australia under CC-BY Creative Commons Attribution 3.0 Australia licence. This imagery was captured by UK2-DMC satellite between December 2011 to April 2012 and has spatial resolution of 22 metres. Spectral bands are: Band 1 NIR; Band 2 Red; Band 3 Green. The DMCii Mosaic is displayed as a Pseudo Natural Colour Image.

This document presents a new set of earthquake hazard maps for consideration in the next revision of the earthquake loading code AS1170.4 "Structural design actions: Part 4 Earthquake actions in Australia". The earthquake catalogue used here includes events up until 2011. It is a combined version of several catalogues provided by external agencies. This represents the most complete catalogue of earthquakes compiled for Australia. The catalogue is more consistent through conversion of various magnitude measurements into a 'pseudo ML' scale. A systematic logic is used to select preferred magnitude types. Aftershocks, foreshocks and mine blasts have been identified and the declustered catalogue used here is cleaner than any previous Australian catalogue. Earthquake source zones applied in the hazard map use a unique combination of three different layers, which capture seismic characteristics at sub-national, regional and high-activity point scales. The map is one of the first in the world to apply a semi-quantitative measure of Mmax for majority of the source zones in the map. We apply recently developed ground motion prediction equations based on modern methods and data. These equations were used to calculate the ground motion at a range of response spectral accelerations, rather than just calculating the hazard for peak ground acceleration (PGA). A suite of maps is calculated using GA's Earthquake Risk Model (EQRM). The EQRM is open-source, allowing the results to be tested or modified independently. The final 2012 Australian earthquake hazard maps for a range of return periods and response spectral periods are presented herein.

This is a proof of concept web service displaying trial samples of historic flood mapping from satellite. Over the next 2 years this service will be developed into a nationwide portal displaying flooding across Australia as observed by satellite since 1987. The service shows a summary of water observed by the Landsat-5 and MODIS satellites across Australia for periods between 2000 and 2012. The first layer set displays national observed water from MODIS fvrom 2000 to 2012, as derived by Geoscience Australia using an automated flood mapping algorithm. The colouring of the display represents the frequency of observed water in a 500 x 500m grid. The higher the number, the more often water was observed by the satellites over the period. This means that floods have low values, while lakes, dams and other permanent water bodies have high values. The three additional layer sets are study areas demonstrating the water observed in each study area by the Landsat-5 satellite, as derived by Geoscience Australia using an automated flood mapping algorithm. The study areas and the observation periods are: Study Area 1, Condamine River system between Condamine and Chinchilla, Qld, observed between 2006 and 2011 Study Area 2, North-west Victorian rivers between Shepparton and Kerang, observed between 2006 and 2011 Study Area 3, Northern Qld rivers, near Normanton, observed between 2003 and 2011 Each Study Area layer set includes a water summary displaying the frequency of observed water in 25 x 25m grids, plus individual flood extents for specific dates where flooding was observed. Similar to the national, MODIS summary, the higher the value, the more often water was observed by the satellites over the period. Limitations of the Information The automated flood mapping algorithm can confuse cloud shadows and snow with flood water, so some areas shown as water may be incorrect. This is a proof of concept dataset and has not been validated.

OPGGSA 2006 - Petroleum Blocks. This service displays the most recent realisation of the Petroleum Blocks as defined under Section 33 (3) of the Offshore Petroleum and Greenhouse Gas Storage Act 2006 (OPGGSA 2006) as realised in GDA94. Block data extends beyond the area of operation of the OPGGSA and includes areas of coastal waters and land within the constitutional limits of the States and Territories.

The Surface Geology of Australia (2010 edition) is a seamless national coverage of outcrop and surficial geology, compiled for use at or around 1:1 million scale. The data maps outcropping bedrock geology and unconsolidated or poorly consolidated regolith material covering bedrock. Geological units are represented as polygon and line geometries, and are attributed with information regarding stratigraphic nomenclature and parentage, age, lithology, and primary data source. The dataset also contains geological contacts, structural features such as faults and shears, and miscellaneous supporting lines like the boundaries of water and ice bodies. The dataset has been compiled from merging the seven State and Territory 1:1 million scale surface geology datasets released by Geoscience Australia between 2006 and 2008, correcting errors and omissions identified in those datasets, addition of some offshore island territories, and updating stratigraphic attribute information to the best available in 2010 from the <A href="http://www.ga.gov.au/products-services/data-applications/reference-databases/stratigraphic-units.html">Australian Stratigraphic Units Database</A>. The map data were compiled largely from simplifying and edgematching existing 1:250 000 scale geological maps. Where these maps were not current, more recent source maps, ranging in scale from 1:50 000 to 1:1 million were used. In some areas where the only available geological maps were quite old and poorly located, some repositioning of mapping using recent satellite imagery or geophysics was employed.

Please note: This product has been superseded by 50m Multibeam Dataset of Australia 2018. - This tile contains all multibeam data held by Geoscience Australia on August 2012 within the specified area. The data has been gridded to 50m resolution. Some deeper data has also been interpolated within the mapped area. The image provided can be viewed on the free software CARIS Easyview, available from the CARIS website: www.caris.com under Free Downloads.

This service has been created specifically for display in the National Map and the chosen symbology may not suit other mapping applications. The Australian Topographic web map service is seamless national dataset coverage for the whole of Australia. These data are best suited to graphical applications. These data may vary greatly in quality depending on the method of capture and digitising specifications in place at the time of capture. The web map service portrays detailed graphic representation of features that appear on the Earth's surface. These features include culture, habitation, industry and utility themes from the Geoscience Australia 250K Topographic Data.